Blog

SFP Transceiver Module

SFP Transceiver Module 

The SFP transceiver supports dual data-rate of 1.25Gbps/1.0625Gbps and up to 120km transmission distance with single-mode fiber or 550m with multi-mode fiber.

The transceiver consists of two sections: The transmitter section incorporates a FP or DFB laser. the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA).
All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable.  Tx Fault indicates that degradation of the laser. Loss of signal (LOS) output indicates the loss of an input optical signal of receiver.
The standard serial ID information compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial bus. For more information, please refer to SFP Multi-Source Agreement (MSA)

Features:

SFP package with LC connector
550m transmission with multi-mode fiber
Up to 120Km transmission with single-mode fiber
+3.3V single power supply
LVPECL compatible data input/output interface
Low EMI and excellent ESD protection
laser safety standard IEC-60825 compliant
Compatible with CE/RoHS

Order Information:

Part NumberData RateWavelenthDistancePackageSourceSFP (155M, LC without DDM)ST-SP851M2L155M8502KMSFPVSCELPINST-SP311M20L155M131020KMSFPFP+PINST-SP311M40L155M131040KMSFPFP+PINST-SP551M40L155M155060KMSFPDFBPINSFP (1.25G, LC without DDM) ST-SP85G05L1.25G8500.5KMSFPVSCEL,PIN ST-SP31G2L1.25G13102KMSFPVSCEL+PIN ST-SP31G20L1.25G131020KMSFPFP+PIN ST-SP31G40L1.25G131040KMSFPFP+PIN ST-SP55G60L1.25G155060KMSFPDFB+PIN ST-SP55G80L1.25G155080KMSFPDFB+PIN ST-SP55G100L1.25G1550100KMSFPDFB+PINSFP (155M, LC ,BIDI without DDM)ST-SPBD351M20L155M1310/155020KMBIDI SFPFP+PINST-SPBD531M20L155M1550/131020KMBIDI SFPFP+PINST-SPBD351M40L155M1310/155040KMBIDI SFPFP+PINST-SPBD531M40L155M1550/131040KMBIDI SFPDFB+PINSFP (1.25G, LC ,BIDI without DDM)ST-SPBD35G10L1.25G1310/155010KMBIDI SFPFP+PINST-SPBD53G10L1.25G1550/131010KMBIDI SFPDFB+PINST-SPBD35G20L1.25G1310/155020KMBIDI SFPFP+PINST-SPBD53G20L1.25G1550/131020KMBIDI SFPDFB+PINST-SPBD35G40L1.25G1310/155040KMBIDI SFPFP+PINST-SPBD53G40L1.25G1550/131040KMBIDI SFPDFB+PINSFP (155M/1.25G SC,BIDI ) without DDMST-SPBD351M20S155M1310/155020kmBIDI SFPFP+PINST-SPBD531M20S155M1550/131020kmBIDI SFPFP+PINST-SPBD351M40S155M1310/155040KMBIDI SFPFP+PINST-SPBD53G40S155M1550/131040KMBIDI SFPFP+PINST-SPBD35G20S1.25G1310/155020KMBIDI SFPFP+PINST-SPBD53G20S1.25G1550/131020KMBIDI SFPDFB+PINST-SPBD35G40S1.25G1310/155040KMBIDI SFPDFB+PINST-SPBD53G40S1.25G1550/131040KMBIDI SFPDFB+PINST-SPBD35G60S1.25G1310/155060KMBIDI SFPDFB+PINST-SPBD53G60S1.25G1550/131060KMBIDI SFPDFB+PINSFP2.125G/2.5G/4G,LC without DDMST-SP2852G03L2.125/2.5G850300MSFPVSCEL+PINST-SP2312G2L2.125/2.5G13102KMSFPFP+PINST-SP2312G20L2.125/2.5G131020KMSFPDFB+PINST-SP2312G40L2.125/2.5G131040KMSFPDFB+APDST-SP2552G60L2.125/2.5G155060KMSFPDFB+APDST-SP2552G80L2.125/2.5G155080KMSFPDFB+APDST-SP2552G120L2.125/2.5G1550120KMSFPDFB+APDST-SP2854G05L4.25G850500MSFPVSCEL+PINST-SP2314G10L4.25G131010kmSFPDFB+PIN1000Base-T Copper SFPST-CSPGT10/100/1000M---100M(UTP-5)Copper SFP---ST-CSPGT10001000M---100M (UTP-5)Copper SFP---ST-CSPT10/100M---100M(UTP-5)Copper SFP---GBIC (1.25G)      ST-GC85G05L1.25G850500MGBICVSCEL+PINST-GC31G20L1.25G131020KMGBICFP+PINST-GC31G40L1.25G131040KMGBICDFB+PINST-GC55G80L1.25G155080KMGBICDFB+PINCWDM SFP (1.25G/2.5G) without DDM, XX=27, 29, 31…61, which 27=1270nm, 29=1290nm, and 61=1610nm     ST-CWSPxxG80L1.25G(1470-1610nm)80kmCWDM SFPDFB+PINST-CWSPxxG120L1.25G(1470-1610nm)120kmCWDM SFPDFB+APDST-CWSPxx25G80L2.5G(1470-1610nm)80kmCWDM SFPDFB+APD

Location

No.99 Guanlan Avenue
Longhua District, Shenzhen 518110
Guangdong Province, P.R. China

Tel  :  +86-27-8720-8018
Email: [email protected]

Leave Message

© 2002~2020 Sunma Fiber Technology Co.,LTD. All Rights Reserved.

Search