ST-2130 E1 Datacom Tester

ST-2130 E1 Datacom Tester

ST2130 E1/Datacom tester is one multi-functional and full- featured digital transmission system test device, designed for the installation test, engineering check and acceptance, daily maintenance of digital networks. Mainly performing channel test, alarm analysis, fault finding and signalling ana

 Specifications:

ST-2130 E1 Datacom Tester
 

ST2130 E1/Datacom tester is one multi-functional and full- featured digital transmission system test device, designed for the installation test, engineering check and acceptance, daily maintenance of digital networks. Mainly performing channel test, alarm analysis, fault finding and signalling analysis. In addition, this instrument further provides various protocol converters with one-way and bi-directional bit error test function. These capabilities make it ideal for field use.

1. Basic Functions

1) E1 testing

  • 75з and 120з line interfaces
  • HDB3 and AMI line codes
  • Out-of-service 2Mb/s, N】64kb/s BER testing
  • In-service framed and unframed testing
  • Frame data control and monitoring
  • Timeslot activity monitoring
  • Built-in 64kb/s tone channel listen capability
  • CAS and CCS signaling generation and monitoring
  • Round trip delay measurement
  • APS delay measurement
  • Extensive error and alarm generation
  • VF tone generation and measurement
  • Frequency, clock slip and level measurement
  • Up to 【999ppm transmit clock deviation
  • Clock source: Internal, Interface or External 2M clock/signal (optional)
  • Real-time transmit circuit open/short indication

2) Datacom testing

  • Datacom (V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A) interfaces BER testing
  • ASYNC BER testing with baud rate 50b/sⅵ57.6b/s
  • SYNC BER testing with data rate 1.2kb/sⅵ2.048Mb/s
  • DTE or DCE emulation mode
  • SYNC clock source and sense selection
  • Frequency measurement
  • Handshaking signals control and monitoring 

3) G.703 CO testing

  • G.703 CO 64kb/s BER testing
  • Octet timing control and monitoring
  • Frequency and offset measurement
  • Clock source: Internal, Interface

4) Protocol converter testing 

  • E1-Datacom SYNC 64k or N】64kb/s BER testing
  • E1-G.703 CO SYNC 64kb/s BER testing
  • Frequency and offset measurement
  • Handshaking signals monitoring
  • E1 frame data monitoring

5) Other functions

  • Real-time clock
  • Test pattern: PRBS, Fixed Code and 16-BIT User Word
  • Error injection: Single and Fixed Rate
  • Manual and auto-timer measurement
  • ITU-T G.821, G.826, and M.2100 performance analysis
  • Self-check and keyboard testing function

2. Main Features.

  • Handheld design and easy-to-use
  • Full-featured measurements to E1, Datacom and Protocol Converter
  • High resolution backlit LCD
  • Smart navigation mode displays
  • Extensive error and alarm generation, detection and indication
  • Histograms analysis of alarm and error events
  • Up to 99 days continuance test performance
  • Save/Recall of up to 10 user-defined setups and 10 sets of results
  • Up to 6 hours operation from a single battery charge
  • Built-in NiMH rechargeable batteries and smart charger circuit
  • Can be charged with automobile cigarette lighter battery adapter
  • Upgradeable software via an integrated USBinterface
  • Test results uploaded, conserved and printed by TestManager software.

3.Configuration List

Item Qua. Item Qua.
AC Power Adaptor    1 TestManagerPro Software CD 1
Automobile Cigarette Lighter Battery Adaptor cable 1 AA NiMH Rechargeable  Battery 5
120 ohm Balanced Test Cable 1 Waterproof Package 1
75 ohm Unbalanced Test Cable 2 Users Manual 1
Datacom Interface Loop-back Connector 1 Quality Certificate Card 1
USB Communication Cable 1 Maintenance Card 1
Datacom Adaptor Cable 4 Packing List 1
G.703 CO Test Cable 1 USB Interface 1
             

4. Specifications

Item

Description

E1

Internal Clock

2048kb/s【10ppm

Frequency Deviation

【999ppm

Line Interface

75ヘ (Unbalanced), 120ヘ (Balanced); High Input Impedance >2KW

Line Code

HDB3, AMI

Framing

Unframed, PCM30, PCM30CRC, PCM31, PCM31CRC

Level Measurement

-43dB~-2.5dB

Tx Clock Source

Internal, Interface and External 2MHz clock or signal (option)

Frequency Measurement

Accuracy:【1Hz

Offset Measurement

Accuracy:【1ppm
Range:-999ppm~+999ppm

VF Injection

Frequency:200Hzⅵ3400Hz,Step:10HZ

Level:-60dBmⅵ+3dBm

VF Measurement

Frequency:200Hzⅵ3400Hz, Accuracy:【1Hz

Level range :-60.00dBm~+3.14dBm
-60.00dBm~-21.00dBm, accuracy: 【2.87dBm
-20.00dBm~+3.14dBm, accuracy: 【0.21dBm

Delay measurement

Accuracy: 【1レs

G.703 CO

Line Rate

64kb/s【100ppm

Line Interface

120W, balanced

Line Code

AMI

Datacom

Line Interfaces

V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530, EIA-530A

Data Rate

ASYNC

50, 75, 150, 300, 600bit/s, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6kb/s

SYNC

1.2, 2.4, 4.8, 9.6, 19.2, 38.4kb/s, N】64kb/s ( N=1~32)

Test Patterns

PRBS

223-1,220-1, 215-1, 211-1, 29-1,26-1

Fixed Code

1111, 0000, 1010

16-BIT

User Programmable Word

LED Alarm Indicators

Signal Loss, AIS, Frame Loss, MFrame Loss, Pattern Loss, Remote Alarm, Error, Clock Slip, Octet Loss, Low Battery

Error Injection

Type: BIT, FAS, CRC4, CODE, E-BIT

Single, Fixed Rate : 10-2,10-3,10-4,10-5,10-6,10-7

Performance Analysis

ITU-T G.821, G.826 and M.2100

Display

240x160 pixel backlit monochromatic LCD

Serial Port

USB Connector

Rechargeable Batteries

5】1.2V AA NiMH batteries, continuous working for 6 hours

Recharge Time

Approx. 2 hours

AC Power Adapter

Input: 100V-240VAC, 50/60Hz
Output: 12VDC/1.5A

TestManager⑩

WIN98/ME/2000/XP/NT

Dimensions

L】W】H 243mm】90/128mm】60mm

Operating Temperature

0∩~50∩

Storage Temperature

-20∩~70∩

Humidity

5%~95% non-condensing

Weight

Approx. 700g


Q Fiber-Mart price-match guarantee?

A Fiber-Mart promises a price match guarantee. If you find a price lower than ours on the Qualified Internet Retailer sites listed below, and you meet the eligibility requirements listed below, we will match the price, or within 3 days of your Fiber-Mart purchase and we will give you the difference.

 

When requesting a price match, please be aware that prices will be compared on the following criteria:

(1). Our Price Match Guarantee does not apply when you use coupons, rebates, promotional offers, free shipping, or product-bundle pricing on the order.
(2). Price comparisons include the product price plus shipping & handling charges when calculating the competitor's total price in comparison to www.fs’s product price and lowest priced shipping method for that item.
(3). Our Price Match Guarantee does not apply to membership pricing.
(4). Our Price Match Guarantee is limited to up to three (3) of the same product, shipped to the same address.
(5). The Price Match Guarantee is subject to change at any time.

Qualified Internet Retailers: eBay.com, Amazon.com, BestBuy.com, Compusa.com, Hardware.com, TigerDirect.com, PROVANTAGE.com

 

Q Warranty---what is this?

A If any product proves defective during this warranty period, Fiber-Mart, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product. In order to obtain sales under this warranty, customer must notify Fiber-Mart of the defect before the expiration of the warranty period and make suitable arrangements for the performance of sales. Customer shall be responsible for packaging and shipping the defective product to Fiber-Mart. Customer shall be responsible for paying all shipping charges, duties, taxes and any other charges for products returned to any other locations.

 

Q Lead-time---what is this?

A Lead time is the period between a customer's order and delivery of the final product. A small order of a pre-existing item may only have a few hours lead time, but a larger order of custom-made parts may have a lead time of weeks, months or even longer. Fiber-Mart produces and stocks a full range of transceivers and other fiber optic products. Normally we can ship within 24 hours, but for some products the lead-time will be 2-3 days or longer. We will notify you of the lead-time over 3 days.

 

Q Trusted by 5000+worldwide buyers---what is this?

A We are so proud of our products trusted by 5000+worldwide buyers.
Fiber-Mart R&D department with core technical knowledge provides strong innovative capability. Fiber-Mart outstanding performance can meet the need of the customer special requirements
We strive to keep our operating expense as low as possible and negotiate for the best prices so we can keep your prices the lowest possible.
We are convinced that path to success is through excellence and customer sales. Our customers are our number one priority. We know you have many choices of where to buy, so we do our best to provide the best products, at the best prices with the best possible support.

Location

No.99 Guanlan Avenue
Longhua District, Shenzhen 518110
Guangdong Province, P.R. China

Tel  :  +86-27-8720-8018
Email: [email protected]

Leave Message

© 2002~2023 Sunma Fiber Technology Co.,LTD. All Rights Reserved.

Search